Ale Beer Brewing Equipment, 200L Beer Making System
|Min. Order (Sets)||FOB Price|
|1+||US $16,000-160,000 / Set|
ale beer brewing equipment,200L beer making system
mash tuns are insulated to maintain a constant temperature.Steam jacket design will allow our systems are designed to do both decoction mashing and infusion mashing. The mashing tun/kettle is made out of stainless steel or copper.
The lauter tun is used for filtering and clarifying the sugar liquid (called wort) out of the heated water-malt mixture (called mash) that comes from the mashing tun.The lauter tun typically has the same capacity as the cooking tun and can also be made out of stainless steel or copper cladding.
After lautering, the beer wort is boiled with hops(and other flavourings if used) in a large tank known as a brew kettle. The boiling process is where chemical and technical reactions take place.
At the end of the boil, the hopped wort settles to clarify in a vessel called a "whirlpool" where there is a tangential inlet of wort.Whirlpool can happen in the kettle because there is no obstacle inside the kettle.
Hot water tanks
Hot water tanks, called liquor tanks in a brewery, are buffer tanks that contain hot water that will be used to sparge the grain bed during lautering to extract a maximum of sugars out of the malt.
cold water tank
Cold water tanks, or cold liquor tanks as they are called in the brewery, are buffer tanks that contain cold water that will be used to cool the bitter wort down to a fermentable temperature range after boiling.
Material: stainless steel AISI 304
Inner surface treatment: cold-rolled plates , 2B surface treatment, welds grinded to Ra 0,8µm.
External surface treatment: cold-rolled plates grinded to SBCooling:
Cylinder: 3 cooling-sections
Conical bottom : 1 cooling-section
Working pressure in cooling-sections - 1,5 bar
Insulation: Polyurethane - thickness 150 mm, density 1,09 g/cm³:both cylinder and conical bottom
External-Jacket: Stainless steel plate - thickness 1,5 mm, both cylinder and conical bottom
Working pressure: 1,5 bar in cylindrical-part (filled-up tank, at 20°C)
We also have the process video for the brewing equipment, if the client do not know the process, the video will be sent.
We will give the layout according to the client's floor plan or their requirements.3D layout also can be provided. This can help the client to get a better understanding about the project.
We will give the detailed diagram of the tanks, this can help the client to know whether this is what they need and also can modify them before placing the order.
Another important issue is installation,2 options can be chosen by the clients as follows:
1).We can send the engineer there for helping the client install debug the equipment, if it is necessary, the engineer also can teach the client how to brewing beer.
2).We can provide the piping diagram and wire diagram. They are useful for installing. Then the client can install the equipment by themselves.
3).The sales will contact with the client all the time until the equipment running normally. Once the client need any assistances or need any accessory, the sales will provide them soonest.
Packing & Delivery
Wooden case or steel frame
This method is very good for loading but need extra cost. Also because of the dimensions of the tanks and container, maybe some tanks cannot use them, but can be confirm when talking about the order.
Generally will use the stretched film, this is free and also can avoid the scratches. Will use the carton to cover all of the accessory